SONAX ProfiLine reusable air cleaner with probe (application hose). Cleans the air conditioning system and removes unpleasant odors. In order to effectively clean the air conditioning system over the long term, SONAX now offers an air conditioning pass1s from PROFILINE. To achieve this, the probe is placed directly in the evaporator. The cleaning performance that can be achieved in this way removes unpleasant odors for a long time. The German manufacturer relies on biotic ingredients that are also known from a similar product from a private series and achieves incredible results there. Eliminate unpleasant odors and smells with superior filter cleaning. Directly into the air conditioning evaporator! The air conditioning pass1si is designed for professionals, as the cabin filter must be removed and sprayed directly into the evaporator. Application: Access and removal of the cabin filter: Cleaning the air conditioning system should always be combined with changing the cabin filter. To do this, access to the filter must be exposed. It is located either inside the vehicle under the dashboard or built into the upper part of the engine compartment. How to get to it is described in the installation instructions that are usually attached to the cabin filter. Below is a description of the case when the filter is located under the glove box. To get to the evaporator, the cabin filter must be removed. To do this, first remove the filter cover cap, then remove the filter. Pay attention to the direction of the air flow! Then you know where the air conditioning evaporator is. The dirty side is always outside! So the evaporator is facing the clean side. Inserting the probe: insert the probe in the direction of the evaporator, then place it in the sprayer. Perform cleaning: Spray the air conditioner back and forth continuously for about 20-30 seconds. Carefully move the probe back and forth so that the evaporator is cleaned with the cleaning agent over as large an area as possible. Wait a few minutes and then repeat the application. Finally, pull the probe out completely. Excess product may drip from the air conditioning water drain under the vehicle. Reassembly: replace the cabin air filter if necessary and reinstall the cover. The vehicle can be used normally immediately. More information can be found in the technical data sheets. Annual application is recommended. Contents: 400ml spray. application hose
SONAX ProfiLine reusable air cleaner with probe (application hose). Cleans the air conditioning system and removes unpleasant odors. In order to effectively clean the air conditioning system over the long term, SONAX now offers an air conditioning pass1s from PROFILINE. To achieve this, the probe is placed directly in the evaporator. The cleaning performance that can be achieved in this way removes unpleasant odors for a long time. The German manufacturer relies on biotic ingredients that are also known from a similar product from a private series and achieves incredible results there. Eliminate unpleasant odors and smells with superior filter cleaning. Directly into the air conditioning evaporator! The air conditioning pass1si is designed for professionals, as the cabin filter must be removed and sprayed directly into the evaporator. Application: Access and removal of the cabin filter: Cleaning the air conditioning system should always be combined with changing the cabin filter. To do this, access to the filter must be exposed. It is located either inside the vehicle under the dashboard or built into the upper part of the engine compartment. How to get to it is described in the installation instructions that are usually attached to the cabin filter. Below is a description of the case when the filter is located under the glove box. To get to the evaporator, the cabin filter must be removed. To do this, first remove the filter cover cap, then remove the filter. Pay attention to the direction of the air flow! Then you know where the air conditioning evaporator is. The dirty side is always outside! So the evaporator is facing the clean side. Inserting the probe: insert the probe in the direction of the evaporator, then place it in the sprayer. Perform cleaning: Spray the air conditioner back and forth continuously for about 20-30 seconds. Carefully move the probe back and forth so that the evaporator is cleaned with the cleaning agent over as large an area as possible. Wait a few minutes and then repeat the application. Finally, pull the probe out completely. Excess product may drip from the air conditioning water drain under the vehicle. Reassembly: replace the cabin air filter if necessary and reinstall the cover. The vehicle can be used normally immediately. More information can be found in the technical data sheets. Annual application is recommended. Contents: 400ml spray. application hose
